TX-11
TX-11, Field scanning device consists of 5 parts. Among these parts;
Power Tube with Chamber
handle
Product Antenna
Short Antenna
Ring Antenna
The TX-11 is a functional device and the building material of the product is brass. It consists of 2 antenna parts. The hole number 1 in the device is used for metal detection, the hole number 2 is used for stenosis and gap detection.
It can also be used in windy weather with its power tube with a reservoir. It automatically scans the land between 750-800 m at a depth of up to 15 meters.
TX-11 Usage;
In order to scan precious metals such as gold, silver, bronze, copper lead, diamond, ruby, emerald, etc. with the field scanning device, the ring antenna should be attached to section 1 of the device.
In order to search for gold, silver, bronze, copper, lead, diamond, ruby, emerald, etc., place a number from the product you want to call into the chamber of the device.
After this process, your TX-11 device is ready for area scanning.
Keep your ready device at chest level.
Your device will give you direction as left and right.
Move towards the point where the device directs you.
At the point where the TX-11 catches the target, it will start to rotate around its own axis at an angle of 360 degrees and the place it turns is your target point.
Finding Depth
Two methods are used to find the depth.
1 Method;
Put a stone at the point where you detected the target.
Turn your back to the target and slowly walk away from the target holding the device at chest level.
While in motion, stay in the position where the device is pointing straight back.
The distance between the position where you put the stone and the point where your device turns back will give you the depth.
2 Methods;
“Put a stone at the point where you identified the target.
Move back 10 meters from the target (with the target in front of you)
Move slowly towards the target with slow steps.
When the device approaches the target, the distance between the point where it moves 360 degrees and the point where you put the stone will show you the depth.
NOTE:
The method is the technique used by archaeologists and has been accepted as the healthiest method.
Cavity Depth Detection
“ring antenna” for searching cavity depth, cellar room with field scanning device
Insert it into hole #2.
The chamber of the device must be empty to search for a cavity depth, cellar room with the field scanning device.
After this process, the area is ready for scanning.
Hold your field scan device at chest level.
The device will show you right and left directions.
Move towards the point where your device directs you.
Your device will start to rotate 360 degrees around its own axis in the position it detects space, cellar room, and the direction it rotates is your target. Call us for more information or take a look at this content we wrote about treasure detectors.
You can also reach us through social media channels.
